FAQ
Clear answers about asphalt sealer, surface preparation, asphalt crack repair, and residential or commercial maintenance.
Sealer helps protect asphalt against water, UV rays, salt, light hydrocarbons, and oxidation. It slows surface wear and restores a more even black appearance.
The goal is not to rebuild a damaged driveway, but to protect a surface that is still sound or properly prepared.
The right timing depends on asphalt age, condition, sun exposure, drainage, and use. A surface that starts to fade or dry out can often benefit from maintenance.
If the driveway has cracks, loose areas, or settling, the required preparation should be evaluated first.
No. Sealer protects and evens out the surface, but it does not correct structural issues such as settling, poor drainage, or an unstable base.
CharboSeal can still tell you whether the surface is ready to be sealed or whether other work should be considered first.
Yes. Cracks are treated before application to limit water infiltration and improve finish durability.
Preparation is part of the final result: a clean, dry, repaired surface accepts the product better.
Ideally, clear the driveway, remove vehicles, bins, trailers, or objects blocking the surface, and avoid watering before the intervention.
Photos sent in advance help identify areas that may need cleaning, repair, or protection.
Sealer must be applied in good conditions. A wet surface, incoming rain, or excessive humidity can hurt adhesion and drying.
The weather window is confirmed before application to avoid a compromised result.
The most useful information is the work address, approximate dimensions, a few surface photos, visible cracks, and the desired service.
These details help us respond faster and recommend the right next step: residential sealer, commercial sealer, asphalt crack repair, or recurring maintenance.
Yes. CharboSeal serves homeowners, property managers, businesses, parking lots, and higher-use surfaces.
The approach is adjusted based on size, traffic, surface condition, and access constraints.
Duration depends on surface area, preparation, number of cracks, and site access. A small residential driveway does not have the same constraints as a commercial parking lot.
Drying time must also be respected before the surface is put back into use.
The delay varies with weather, humidity, temperature, and surface ventilation. Instructions are confirmed based on conditions that day.
Respecting drying time helps avoid marks, tire tracks, or displaced areas.
Frequency depends on exposure, use, drainage, salt, and the overall asphalt condition. Some surfaces need closer follow-up than others.
Recurring maintenance programs make it possible to plan interventions before the surface deteriorates too much.
Avoid standing water, clean debris, watch for new cracks, and limit heavy loads or objects that can mark the surface during hot periods.
Simple follow-up through the seasons helps extend asphalt appearance and protection.
